Focus on automation welding technology innovation.
HCD500-6
All Position Automatic Welding Carriage
Advance Technical Configuration
– Auto-Wireless Remote Control
– FCAW and MIG welding process.
– Applicable FCAW Electrode from 1G ~ 6G position.
– Easy assembling track and side Wall Magnetic
– Powered by lithium battery with external power supply cable
HCD500-2C
Battery Weaving Automatic Welding Carriage
Advance Technical Configuration
1. Auto-Wireless Remote Control
2. FCAW and MIG welding process.
3. Suitable for flat fillet welding and flat butt, internal fillet
4. Track method by guide wheel with magnetic adsorption
5. Welding torch arc suppression time adjustment range is 0-2.5 S.
HCD500B-1
Battery Double-Side Fillet Automatic Welding Carriage
Advance Technical Configuration
-One machine holds two welding torches, one-time walking double-sided fillet welding.
-It has limit stop funcion and one worker can operate multiple units at the same time.
-This carriage has a magnetic adsorption clutch handle and it is easy to adjust and install.
-Suitable for I-beam, reinforced ribs, T-beam work piece welding.
-Conventional configureation for welding of ribs below 390mm height.
-AC220V transformation can be configured for power supply. The model is HCD-500B.
HCD500-9
Automatic Welding
Carriage
Advance Technical Configuration
1. Auto-Wireless Remote Control
2. FCAW and MIG welding process.
3. Applicable FCAW & MIG weld butt joint and fillet joint.
4. Track method by guide wheel profiling with magnetic adsorption
5. Digital control panel and precise control travel and weaving speed
HCD500-8
Automatic Welding
Carriage
Advance Technical Configuration
– This trolley is widely used in flat butt joints, vertical butt joints and cross butt welding, especially suitable for thick plate special welding.
– Small size, light weight, easy to move and use.
– Precise control of traveling speed, weaving speed, weaving angle and left, right resistance time.
– The rail length is 1.5 meters. It can be connected or customized according to requirements
HCD500-3E
Vertical Fillet Automatic Welding Carriage
Advance Technical Configuration
-Equipped with a conventional gas shielded welding power source, it can realize automatic gas shielded welding operation. This carriage is especially suitable for vertical T-bar automatic welding operation.
-Using of the digital control system is based on MCU, it is high in control precision. The parameter visualization design is convenient for later process parameter standardization.
-Driven by full brush-less motor, it is reliable on operation and has longer using life.
-Using of the self-adsorbing rail special designed for T-bar, it is reliable, convenient and high efficiency.
-Can choice the left or right position of the welding torch.
-Powered by a lithium battery, no external power supply is required, one charge can meet 8 hours of continuous operation.
GCD400-3 Gouging
AUTOMATIC RAIL WALKING GOUGING CUTTING CARRIAGE
Advance Technical Configuration
1. Auto-Wireless Remote Control
2. FCAW and MIG welding process.
3. Applicable FCAW & MIG weld butt joint and fillet joint.
4. Track method by guide wheel profiling with magnetic adsorption
5. Digital control panel and precise control travel and weaving speed
HCD500-1K
BATTERY WEAVING AUTOMATIC WELDING CARRIAGE
Advance Technical Configuration
-The whole body is made of aluminum alloy, which is solid and durable. Cariiage is powered by a lithium battery, no external power supply is required, one charge can meet 8 hours of continuous operation.
-This carriage is equipped with an oscillator part and the oscillator is driven by a brush-less motor with high precision and long using life.
-By means of magnet adsorption and the guide wheel profiling walking, it meets ordinary flat filled welding and thick plate groove multi-pass welding.
-With welding torch arc suppression function, arc suppression time adjustment range is 0-2.5 seconds
-Fitted with rail and hook wheels, it can complete the flat butt weaving welding.
-This carriage has a magnetic adsorption clutch handle and it is easy to adjust and install.
HCD500-2J
Semi-Automatic Welding Carriage
Advance Technical Configuration
1. Auto-Wireless Remote Control
2. FCAW and MIG welding process.
3. Suitable for flat fillet welding and flat butt, internal fillet
4. Track method by guide wheel with magnetic adsorption
5. Welding torch able to choose the left or right position to weld
GCD400G-3
Automatic Rail Walking Gouging Cutting Carriage
Advance Technical Configuration
Working with the plasma power supply, this carriage can complete the gouging and groove cutting operations, it greatly reduces the labour intensity.
-The rail fixed switch magnetic seat is a strong magnetic adsorption structure, the position is adjustable and it can meet the spanning installation of the reserved hole on the steel plate.
-Powered by a lithium battery, no external power supply is required, one charge can meet 10 hours of continuous operation.
-Using linear oscillator design, it can satisfied the seam gouging at different widths.
-The rail length is 1.5 meters, the continuous operation can be extended alternately through multiple rails.
-This carriage is using rail magnet adsorption, it completes straight walking through the rack and pinion transmission.